High temperature, Air-drying metallic zinc-based coating, resistant to 600°C.

Fast-drying product with good overcoatability. Good corrosion inhibitor; features excellent elasticity and good chemical resistance.

Colours

It comes in just one colour: metallic zinc grey with a very matt finish.

Uses

It's used as an adhesion promoter and corrosion inhibitor in air-drying coating systems that prescribe the use of metallic zinc.

Widely used in coating treatments in large chemical plants, ironworks, steelworks and cement factories for coating metalwork exposed to very hot and corrosive environments.

Performance

This technology has proved very popular due to its:

• heat resistance certified by the manufacturer
• excellent adhesion and elasticity
• good anticorrosive properties
• good overcoatability

Treatment of surfaces to be coated

The metal to be treated should preferably be clean, free from dirt, grease, oil or residues of any nature.

For cleaning the metal surfaces the suitable diluent is DPM01

To promote optimum adhesion, especially on shiny and reflective metals, it's best to treat surfaces first by abrasive blasting, brushing or sanding.

Application

The product is ready for use. However, only when absolutely necessary can be diluted with the specific diluent DL003.

To achieve a high standard of finish, it's best to use spray equipment – either airmix or airless – and fit the spray gun with nozzles measuring between 1.0 and 1.7 mm.

The product can also be applied by roller or brush, provided you're careful to keep the film thickness even and below 40-50 microns in both cases.

Air-dries at ambient temperature and can be overcoated after a few hours.

Yield

7 m² with 1 Kg of product by applying a thickness of 30 µm.