Riloplast 50 wrinkle

The Wrinkle Coating

The only coating approved by the world's leading car and motorcycle manufacturers and prestigious brands of design, creative, architecture and furnishings, and where fantasy application exalts the technical peculiarities.

Kilogram (kg)
Add to Wish List

information request     technical assistance   photo and video gallery   for order click the information request button

cottura a forno - oven baked monocomponente - one-pack

Uses

This is the only wrinkle effect approved by the world's best known car manufacturers for embellishing their leading models.

It has been used to enhance engine and transmission parts and other car and motorcycle frame, chassis and bodywork parts since the early eighties.

It has become popular in the marine sector for coating exhaust manifolds, interiors and other fabrications.

It is used widely in the design field in the world of eyewear, watchmaking, jewellery and commercial interiors.

Also called Wurmförmigem Effekt, Effet Vermiculé, Efecto Vermiculado, Effetto vermicolato, Efekcie robaczka, Efeito Vermicular.


Performance

This product is one of a kind in terms of both its aesthetic effect and its performance:

  • adhesion to metal and many plastics
  • excellent protection against corrosion
  • excellent chemical resistance
  • hardness and elasticity
  • lends itself to coating prior to subsequent machining

Heat Resistance:

  • 180°C for all the colors

Chromatic Resistance:

  • 140°C Black, Anthracite, Blue Maserati, Military Brown, Military Green
  • 100°C for all other colors

 

Treatment of surfaces to be coated

All metal to be treated must be thoroughly clean, making sure there are no traces of oil, dust or dirt.

Cleaning can be done using suitable degreasing detergents or solvents.

For cleaning the metal surfaces the suitable diluent is DPM01

For cleaning the plastic surfaces the suitable diluent is DPP02

The product adheres directly to most common metals. If you need to coat stainless steel, pressed aluminium or other metal substrates with a particularly smooth, reflective surface, abrasive blasting or sanding are recommended to promote optimum adhesion.

Adhesion to plastics such as ABS, PS, PC and PVC has been proven by lab tests and in industrial applications. For other more difficult polymers, you may need to apply an adhesion–promoting primer, such as K54 Duracril.


Application

The product is ready for use. However, only when absolutely necessary can be diluted with the specific diluent DL003.

Apply by spraying only, with nozzles measuring between 1.5 and 2.0 mm and with air pressure set to 3–4 bar, using normal airmix or airless equipment.

It must be applied in a thick film, in the range from 200 to 300 microns.

The final wrinkle effect actually depends on the thickness of the film applied. With a thin film, the wrinkle effect will be subtle; a more pronounced wrinkle effect is achieved with a thick film.

Up to 6–7 coats can be applied to reach the average coating thickness of 250 microns. We actually recommend applying a number of thin coats, leaving 2–3 minutes between each, to avoid sag and to achieve a nice and even thickness all over the item being coated.

The product must be oven baked, at a temperature of 50°C for at least 60 minutes. Alternatively, you can use heat lamps or electric hot air blowers


Yield

3 m2 with 1 Kg of product by applying a thickness of 250 µm.

 

What is the difference between Riloplast 80 and 50?

The wrinkle paint Riloplast 80 is used in the industrial processes.

Because there was continuous demand to be able to obtain a similar effect to version 80 reducing the cooking temperature, has been formulated a version of Riloplast that wrinkling at a temperature of 50°C, this temperature is possible to obtain also with means such as heat lamps, hair dryer with a certain power and other sources of heat, making sure that if were hot air must absolutely avoid that the hot air arrivals directly on film.

Still it is important to consider that it is the media that should reach that temperature, so it is necessary to consider the thermal inertia of support in terms of mass.

From the point of view of performance, the two versions are equivalent, the substantial difference between Riloplast 80 and 50 lies in the fact that:

The first in summary allows you to adjust the wrinkle ridges from thinner to medium to coarse, even better will be highlighted in the technical product. What is not perceivable by the applicator is not so much the aesthetic, which is what concerns most users, but it is in the formulation or in the characteristics of materials, production methods and other measures that enhance the uniqueness of technical / appearance / texture of Riloplast 80.

The second, Riloplast 50, regardless of the thickness applied, allows only a thin wrinkle-type finish. In fact it is a less "enriched" for not only reasons of formulation equilibrium.


 

 




DOWNLOAD COMPLETE CATALOG

  • Drying Oven Curing
  • Composition One-pack
  • Typology Solvent-based
  • Material Metal / Plastic
  • Heat Resistant Heat Resistance: 180°C for all the colors; Chromatic Resistance: 140°C Black, Anthracite, Blue Maserati. 100°C for all other colors;
  • Performance anticorrosive / chemical resistance / mechanical resistance
  • Application spraying
  • Suitable diluent DL003

Write your review

Riloplast 50 wrinkle

Riloplast 50 wrinkle

The Wrinkle Coating

The only coating approved by the world's leading car and motorcycle manufacturers and prestigious brands of design, creative, architecture and furnishings, and where fantasy application exalts the technical peculiarities.

Write your review